Step-by-Step Guide to Installing Control Arms on a Rolls Royce

When it comes to maintaining a Rolls Royce, precision and quality are paramount. The control arm plays a vital role in your vehicle’s suspension system, ensuring proper wheel alignment and handling, and absorbing the impact from everyday driving conditions. Over time, wear and tear can compromise this critical component. If you're ready to replace your control arms with high-quality parts from Exotic Parts Depot, this detailed guide will walk you through each step of the process to help you do the job right, all while preserving the performance and grace of your Rolls Royce.

Tools and Equipment Required

Before beginning, assemble the following:

• Jack and jack stands

• Torque wrench

• Ratchet and socket set

• Breaker bar

• Ball joint separator or pickle fork

• Pry bar

• Wrenches (metric)

• Hammer

• Penetrating lubricant

• Safety gloves and glasses

• Replacement control arms from Exotic Parts Depot

Choose a clean, level work surface and allow the car to cool before starting. Make sure the vehicle is in park (or in gear for manuals), the parking brake is applied, and the wheels are chocked for safety.

Step 1: Lift the Vehicle Safely

Start by loosening the lug nuts on the front wheels slightly, then use the jack to lift the front of the vehicle. Place jack stands under the manufacturer-recommended support points and ensure the car is secure. Once elevated, remove the wheels completely and set them aside.

Step 2: Locate and Inspect the Control Arms

Identify the upper and lower control arms connected to the suspension system. On a Rolls Royce, these components are often engineered with refined precision, and it's essential to inspect for signs of wear such as torn bushings, cracked arms, or loose ball joints. If replacement is needed, proceed to the next step.

Step 3: Apply Penetrating Lubricant

Spray all fasteners connecting the control arm to the frame and suspension with a quality penetrating lubricant. Allow several minutes for the solution to penetrate, especially if the vehicle has been exposed to moisture or salt, which can cause corrosion.

Step 4: Remove Ball Joint Connections

Use a ball joint separator or pickle fork to disconnect the ball joint from the steering knuckle. A hammer may be needed to tap the separator into place. Be cautious not to damage surrounding components. Once separated, use a wrench or socket to remove any nuts securing the ball joint to the control arm.

Step 5: Detach Control Arm Mounting Bolts

With the ball joint detached, locate the bolts securing the control arm to the chassis or subframe. Use a breaker bar if necessary to loosen stubborn bolts. Keep track of the hardware, as you may reuse some of it during installation. Carefully remove the old control arm and inspect the area for any damage or debris.

Step 6: Prepare and Install the New Control Arm

Unbox your replacement control arms from Exotic Parts Depot and verify they match the original components. Compare dimensions, bushings, and joint angles. Clean the mounting points on the chassis and apply anti-seize lubricant if desired. Align the new control arm into position and loosely install the mounting bolts.

Step 7: Reconnect the Ball Joint

Guide the ball joint stud into the steering knuckle and secure it with the appropriate nut. Torque it to the manufacturer's specification for your Rolls Royce model. Once connected, go back and torque the control arm mounting bolts to the correct settings as well.

Step 8: Reinstall Wheels and Lower the Vehicle

Put the wheels back on and thread the lug nuts by hand. Carefully lower the vehicle using the jack, then torque the lug nuts in a crisscross pattern to ensure even pressure. Double-check that all bolts and nuts are properly tightened before driving.

Step 9: Get a Professional Alignment

After replacing control arms, it is crucial to get a professional wheel alignment. Even with precision installation, your wheels may be out of specification due to the new angles introduced by the fresh components. A proper alignment ensures safety, tire longevity, and optimal handling performance.

Maintenance Tips

• Regularly inspect suspension components during oil changes or seasonal maintenance.

• Listen for clunking or popping noises while driving, which may signal worn control arm bushings.

• If your Rolls Royce pulls to one side or feels unstable during braking, the control arms should be checked.

Why Choose Exotic Parts Depot for Rolls Royce Suspension Parts?

At Exotic Parts Depot, each control arm is engineered to match Rolls Royce specifications and performance expectations. Designed with premium materials and crafted with attention to detail, these aftermarket parts offer a dependable alternative to OEM components—without the steep dealership pricing. Whether you're driving a Ghost, Phantom, Wraith, or Cullinan, Exotic Parts Depot provides control arms that seamlessly integrate with your vehicle's sophisticated suspension system.

Each part is rigorously tested to ensure compatibility, durability, and smooth operation under both city and highway conditions. And with a commitment to customer satisfaction, Exotic Parts Depot offers guidance and support for those who prefer the DIY route without compromising on quality.

Replacing control arms on a Rolls Royce is no ordinary task—it's a delicate procedure that demands patience, precision, and premium parts. By following this guide and sourcing your components from Exotic Parts Depot, you not only preserve the integrity of your vehicle but also elevate your hands-on experience as an enthusiast. Take your time, work methodically, and enjoy the process of caring for one of the most refined machines ever built. Because even behind the wheel of luxury, true excellence lies in the details.