Step-by-Step Guide to Installing Rotors on an Aston Martin

Driving an Aston Martin is about more than transportation—it’s about elegance, precision, and the unmistakable thrill of performance motoring. Maintaining such a machine requires a discerning eye and attention to detail. One of the most essential areas to monitor is the braking system. If it’s time to replace your rotors, whether due to wear or an upgrade, doing the job yourself can be a rewarding and practical task. This guide offers a complete, step-by-step overview for installing rotors on an Aston Martin using performance-grade components from Exotic Parts Depot.

Tools and Supplies You'll Need

Before starting, make sure you have the following tools and supplies ready:

• Floor jack and jack stands

• Lug wrench

• Socket and ratchet set

• Torque wrench

• Brake caliper tool or C-clamp

• Wire brush

• Brake cleaner

• Rubber mallet

• Bungee cords or zip ties

• Protective gloves and safety glasses

• New rotors from Exotic Parts Depot engineered specifically for Aston Martin

Choose a flat, well-ventilated work area. Always prioritize safety by using jack stands and wearing protective gear.

Step 1: Prepare the Vehicle

Park your Aston Martin on a level surface and engage the parking brake. Use wheel chocks to secure the rear wheels. Loosen the lug nuts on the front wheels slightly before lifting the vehicle. Use the floor jack to raise the car and secure it with jack stands under the designated lift points. Once elevated, fully remove the lug nuts and take off the wheels.

Step 2: Access the Brake Components

With the wheels off, you'll see the brake caliper and rotor. Locate the bolts on the back of the caliper and remove them using your socket and ratchet. Carefully slide the caliper off the rotor and suspend it with a bungee cord or zip tie to prevent stress on the brake hose.

Step 3: Remove the Old Rotor

If your Aston Martin uses retaining screws on the rotor, remove them with a screwdriver. If the rotor is stuck due to corrosion, gently tap the back side of the rotor with a rubber mallet. Avoid hitting the rotor face directly or using excessive force. Once loose, slide the rotor off the hub.

Step 4: Clean the Hub Area

The hub surface must be perfectly clean before installing the new rotor. Use a wire brush to remove rust and debris, then spray with brake cleaner and wipe dry. This step helps ensure proper seating and eliminates future issues like rotor wobble or uneven pad wear.

Step 5: Install the New Exotic Parts Depot Rotor

Unbox your new rotor from Exotic Parts Depot. These are manufactured to meet or exceed OEM specifications, ensuring a precise fit and excellent performance on Aston Martin models. Clean the rotor with brake cleaner to remove any protective coating. Slide the rotor onto the hub and align it correctly with any pins or screw holes. If retaining screws were used, reinstall them now.

Step 6: Reattach the Brake Caliper

Before reinstalling the caliper, check the condition of your brake pads. If they’re worn, this is a great opportunity to replace them. Use a caliper tool or C-clamp to compress the piston back into its housing so that the caliper fits over the new rotor. Once aligned, bolt the caliper back into place and torque the bolts to the Aston Martin’s specifications.

Step 7: Reinstall the Wheels

Put the wheels back on and hand-tighten the lug nuts. Lower the vehicle carefully to the ground using the jack. Once on the ground, torque the lug nuts in a star pattern to the correct setting listed in your owner’s manual.

Step 8: Bed in the Rotors

Proper bedding of new rotors ensures long-lasting performance and safety. This process involves a series of moderate stops from 30-40 mph to evenly deposit brake pad material on the rotor surface. Avoid harsh braking for the first 100 miles to allow everything to settle.

Maintenance Tips

• Inspect your brake pads and rotors every 10,000 miles.

• Always replace rotors in pairs to maintain even braking.

• Use high-quality brake fluid and check levels regularly.

• Clean components during each brake job to prevent long-term issues.

Why Choose Exotic Parts Depot for Aston Martin Rotors?

Exotic Parts Depot provides rotors specifically engineered for the demanding standards of Aston Martin vehicles. From the DB11 and Vantage to the DBS and Rapide, their rotors are tailored for luxury performance. You get precision engineering, durability, and braking consistency that meets or exceeds factory standards. The best part? You avoid inflated dealership prices while still giving your Aston Martin the high-caliber parts it deserves.

Exotic Parts Depot ensures their rotors are compatible with Aston Martin’s advanced braking systems. Whether you're seeking peak performance for spirited driving or simply replacing worn components, their parts offer a seamless fit and trustworthy reliability.

Replacing rotors on an Aston Martin isn’t just maintenance—it’s a commitment to preserving the elegance and performance that make your vehicle iconic. With the right tools, careful attention, and top-quality rotors from Exotic Parts Depot, you can confidently complete this job and continue enjoying your drive with peace of mind. Whether you're chasing perfection or just avoiding costly service fees, doing it yourself is a rewarding way to stay connected to your car. Each turn of the wrench becomes an act of ownership, craftsmanship, and pride.